Saturday, August 31, 2019

Interview people about the economy Essay

The people of the Orange County are an optimistic bunch. Yet, one can see this optimism slowly fading away into the darkness. For a country which is so close to perhaps world’s biggest entertainment hub, this is not a pretty picture. It would be wrong to blame the people. Little has gone right for the county since the economic recession of 2008, the effects of which are still quite visible. For a county which was already suffering from one of the more serious unemployment problems than compared to the average figures of the United States of America, the recession of 2008 has spelt doom, and its repercussions can still be felt. Take the case of the 34-year old Mr. Matthews who had a small shop selling electronic goods. However, with most people who gave him patronage, out of jobs or saving up for the bleak future, there are no takers for his once steadily selling shop of television sets and radios. His only hope is a government bailout, so that his customers have more money in their hands, or in other words greater purchasing power so as to indirectly get him out of this mess. Mr. Matthews situation is in complete contrast with Mrs. Mosby who is a secretary with the local government authority. She has been affected very little by the 2008 economic recession but maintains that she is concerned about a lot of her friends, whose businesses have shut or who have been shown the door in their jobs. The only consequence of this recession on her is that while her pay has not increased, prices of many commodities of even general use have gone by which makes it difficult for her to make the ends of her household meet. She is for the moment thankful that she has a government job, but strongly advocates that it is the state’s responsibility to find her fellow citizens a job which at the very least promises them adequate means of survival. Recession and the deteriorating economic situation is a concern not only to those who are currently affected by it, but also those who may be affected by it in the future. Take the case of 24-year old Mike, who is a final year student at the local university. He agrees that the heat in the air can be felt by all, and even though his university manages to put together a small career fair every year, it seems a difficult proposition this year. Although in the top half of his class, Mike admits that getting a job which helps him repay his educational loans he took for college, at least currently, seems to be a daunting task. He is hopeful that by the time he graduates, the situation would improve. He doesn’t make a case for out and out state intervention, but hopes that the state would help big economic powerhouses by giving them incentives and subsidies. Things have turned sour for those who are self-employed as well. Take the instance of a lawyer who has his own practice, Miss Timberlake. Litigation has become suddenly too expensive, and people seem to prefer to hold up matters for now. Even matters of home foreclosure have got delayed for now. People are looking at otherwise normal litigation procedures as a luxury service, which they are unable to afford at the moment, and are not as big a priority as say medical and health expenditure. Health insurance companies are facing the heat as no other according to Jeff, who works at one of the biggest insurance companies. The health and medical costs have spiraled over the last few years. The fact that people have very little disposal income, and are defaulting on their regular premium payments is making the matters worse for the insurance companies. Their being no solution in sight, people are turning to each other and urging them to perform acts of gratitude. For instance, appeals are being made to doctors and other hospital staff to give up a day’s pay. People are becoming much more cautious and conservative in spending their money. For instance, the younger siblings are getting their older siblings clothes. The insurance companies don’t have enough cash flowing in so as to be able to cope up with the increasing medical costs. This spells a disaster not just for one or two companies, but for two industries which are vital to the US economy – health and insurance. Whether there is a way out of this mess is the million dollar question facing everyone right now. The companies in both sectors, however, are optimistic and hope to see things improving with the Obama administration. Obama’s success in being able to pass the health insurance bill is being seen as a huge positive and people seem to be oddly comforted by his words of promise. Job creation is what people are currently looking forward to. Perhaps, the only sections of the society who have nothing to lose right now are the school going children. However, it is amazing how the economic crisis has made way into their everyday conversations as well. David who is only 14 is angry at the whole situation. He maintains that the whole crisis is the fault of the government, which allowed risky investments to be made. He is also unhappy about the liberal policies which have allowed a bulk of the work to be outsourced to other destinations where labour is much cheaper. Stricter laws are needed, he argues emphatically. Those who are retired have been hit badly as well. Their pension schemes and other insurance amounts are simply not enough for them to be able to make their ends meet. Home foreclosures are likely and in the offing, and this has most of them worried. Take the case of Mr. Andrews, who is 66 years old and survives on a small pension scheme. Recently the prices of even basic consumables have risen so sharply risen that he is finding it difficult to make the ends meet. His old age means that it is much more difficult for him to find a job as compared to other freshers just out of college. He is worried that if the State fails to take some concrete steps soon, many Americans could be tinkering on the verge of starving poverty. Take the case of Mr. Murdoch who is a stock market analyst and broker. In the economic recession of 2008, he lost close to $100,000. He says that he is devastated and doesn’t know if there is any hope remaining for his business, and whether he will be able to revive it in the near future. He is currently torn between the idea of continuing his business, or taking up a small job somewhere. However, he himself laughs at the irony of it all, given that it would be near impossible to find a job anywhere. He also feels responsible to many of his clients, who he was acting for, and have lost a considerable amount of money in the stock market. At the same time, however, he is quick to point out that investment in the market is subject to market risks, and therefore, one is understood to have assumed the same.

Friday, August 30, 2019

Book Review Last Song

In The Last Song God is talked bout a lot and believe since Sparks was Catholic, that influenced him to add his religion into his Story. I personally do not see the author in the Story. I think he did not want to add himself in the book. The book is written in third person point of view. The point of view written in the book helps the reader understand what the character was feel Eng and the inking. Throughout the story, the author uses a lot of literary devices. At least every other page has a literary device to it. A common one I found throughout the story is simile.Of ours it's the most common literary device. Ronnie loves her brother â€Å"even though they fight like cats and dogs† and â€Å"still [takes] him to the park every weekend† (Ronnie, 23) showing that she is still willing to do things for her only brother. Steve, Ronnie and Jonahs father, shows his love for his children throughout the novel. â€Å"Spending time with Joana had been like finding special tre asure,† Steve loved his kids and spending time with them, â€Å"and he wanted to spend time with [Ronnie] as well† (Steve, 1 00) and wanted to be a part of their lives again.Love is a main theme throughout the story and while love is shown differently by each character, it is all the same. Steve has love for music and his children. Ronnie has love towards her family and Will who she met and fell in love with during the summer. And Joana loves spending time with his father and picking on his sister. The story is about a girl named Ronnie, who has to spend the summer with her dad and brother. She hung out with the wrong crowd at the beginning but after an incident she stayed away. While there she meets Will, a guy who helps her trust again.He helped her find her true self and mature into a young woman. It takes time for Ronnie to let her father back into her life again because she was upset at him for leaving. The story had lots of phrases I liked. One in particular but i t is dialog between two main characters. ‘†Can I ask you a question? ‘ (Will) ‘I'm not sure I can stop you. â€Å"‘ (Ronnie, 151) do not know why but out of the entire dialog in the story that part just jumped out. It showed how straight forward Ronnie can be. The story is written using modern English. It is not to old were o cannot understand it.At the beginning of the Story, Ronnie felt distant with her father, maybe even hate towards him. When I was in middle school used to give my parents the cold shoulder. So I can kind of relate to how Ronnie felt at the beginning of the story. My favorite character is Ronnie because she will say â€Å"what [is] on her mind† (Will, 145) and not care what other people think. Marcus is my least favorite character. He â€Å"[thinks] only about himself† (Ronnie, 138) and his personality bugs me. In the beginning of the story Ronnie felt like she did not belong. In middle school when I just started as a sixth grader used to feel like I did not belong.But eventually just like Ronnie, started feeling like that's where I am supposed to be. Personally enjoyed the entire story. It had its happy moments and other bittersweet moments that made this story one of my favorites. My favorite part of the story is when Ronnie visited Will's house for the first time. She was like a fly in a glass of milk; the author writes, â€Å"She might as well have landed on mars† [Ronnie, 227] proving my point that she felt she didn't belong there. My least favorite part was when Blaze planted some Cad's in Rennin's bag so it looked like she was shoplifting.Blaze knew what would happen to her because Ronnie said she couldn't be caught shoplifting again during the year or they would not drop the charges from the other time she did it. Would definitely recommend this book. I have read it a couple Of times and seen the movie, each time finding something new in it. The book has a bittersweet ending to it but the message it gives is wonderful. Honestly, anybody would enjoy this, Nicholas Sparks writing pulls at the heart strings, if you are willing o put the time into reading this, you will not regret it because it is a good book.

Thursday, August 29, 2019

Solution for Air Pollution

2 March, 2008 The Solution for Air Pollution Society as a whole faces many environmental problems, and as a result, environmental awareness tends to be a pressing issue. Every day, people recycle cans, glass bottles, and newspapers. Many people buy bottled water, or own filters for their tap water, as a health precaution from the pollutants in normal everyday drinking water. Air pollution is perhaps the biggest environmental issue the Earth is facing. Automobiles are responsible for a notable amount of the air pollution problem. Of course, on the other hand so are factories. If the fight against air pollution were to be taken to a higher level, putting pressure on factories that produce air pollution will have a greater effect than focusing on automobiles. The solution for problems caused by automobiles can only be taken to the level of removing vehicles off the road that cause excessive pollution. A campaign to promote car-pooling, and the use of public transportation could be started up, but those types of promotions do not get enough support. Clearly, factories should be targeted for the best results. The environmental policies that the government regulates for factories or other companies who produce air pollution must be made stricter. Factories are causing enormous amounts of air pollution, the air in most metropolitan areas is filled with pollutants, and passing laws that are more strictly enforced could have a positive effect on the situation. Air pollution can be simply defined as â€Å"all the substances that are exhausted into the atmosphere that do not normally make up the air. There are numerous types of these pollutants in the air, but carbon monoxide, sulfur dioxide, hydrocarbons, and nitrogen oxides are, by far, the most common. Such particles are expelled daily by leniently controlled factories through the continuous outpour of smoke. The primary process that creates air pollution is oxidation, which is simply defined as burning. This process has been going on for centuries, beginning when man first became aware of a very useful cooking tool, what is now known as fire. As technology advanced, major industries developed and began to use fires as a source of energy for power plants and the disposal of garbage. Air pollution has long been a factor with the issue of protecting the environment. For example, in the nineteenth century, people in London, England complained about the foggy weather that was created by the smoke from burning coals in the homes of people, as well as places of business. In December of 1952, the worst air pollution disaster ever recorded also occurred in London. Nicknamed the â€Å"killer smog,† this disaster occurred because of a temperature inversion, which is when warmer temperatures get hotter as they get further from the earth’s surface rather than cooler as they usually do. In this particular event, a cool front also moved in below the warm air, which caused more people than usual to burn coal, which is high in sulfur. Because of the warm air that had risen, the smoke from the fireplaces had nowhere to rise and was being pushed back down. This string of events produced the â€Å"killer smog† which led to the deaths of more than four thousand people. Because of this one horrific event, scientists became more aware of the effects that air pollution can have on a population, which has led to more in-depth studies. The same type of pollution, though in much more extreme cases, can be seen in cities today. The modern name for the foggy weather that these people were seeing is now referred to as smog. It is composed of mainly ground level ozone, which is caused by toxins in the air. These toxins are released mainly through the exhaust systems of automobiles and from factories. There are two main causes of air pollution: automobiles and factories. The dangerous effects that these two cause can be primarily attributed to burning, or more specifically, oxidation. When a substance is burned, it releases harmful byproducts that are emitted into the air and thereby become pollutants. The greater majority of citizens drive automobiles, and they are vital in everyday life for the purpose of transportation. There are many practical, cost-effective measures that can be taken to reduce the emissions of air pollutants, including the adoption of energy conservation measures and switching to natural gas. Many existing Clean Air Act programs, such as the acid rain program, and the ground-level ozone smog programs, if properly implemented, will do much to reduce the concentration of fine particles by controlling the pollutants. These give a hopeful outlook that the air pollution problem can cease to exist in the severe form that it now does, and with the support of not only governmental agencies and non-profit organizations, but also the help of everyday citizens, the problem can be overcome in no time. The air that people breathe everyday is critical to the very existence of not only civilization, but also the entire Earth; therefore, taking care of it should be a priority to everyone that inhabits it. A commitment needs to be made by all. It is not necessary for everyone to be radical protesters against factories and automobile manufacturers, but if everyone were to get involved, even in the slightest way, such as carpooling to work, the air that is inhaled by all as a matter of survival would be increasingly cleaner. The air pollution created by these factories is dangerous to the environment and to the health of people everywhere. â€Å"Industrial air pollution is the greatest threat to air quality in the United States. The factories themselves must not be treated as criminals in this matter; their intent is not to harm the environment, but to provide a product. They must be treated as fairly as possible, while still accomplishing the goal of cleaner air. Although this will be a long process, the end result of cleaner air and a cleaner environment will prove to be well worth the time, money and effort spent. References used: http://www. epa. gov/ http://www. yale. edu/ynhti/curriculum/units/1986/6/86. 06. 04. x. html#a http://www-personal. umich. edu/~murty/techhype2/node16. html http://search. cancer. org/search? client=amcancer&site=amcancer&output=xml_no_dtd&proxystylesheet=amcancer&q=air+pollution http://www. npr. org/templates/story/story. php? storyId=873954 http://wrc. iewatershed. com/index. php? pagename=education_forest_02 http://www. ncstormwater. org/pages/workbook_pollution_solutions. html

Wednesday, August 28, 2019

Leadership, Teambuilding, and Communication Essay - 3

Leadership, Teambuilding, and Communication - Essay Example The company’s profits mainly come from advertisement services. Google inc. was founded by Sergey Brin and Lary Page of the University of Stanford in mid 1990s before going public in 1998 and headquartered in Mountain View, California. The company has witnessed tremendous growth in the past decade and is currently running over one million data service centers worldwide and processing numerous search requests. All the achievements certainly came as a result of the leadership characteristics and style adopted the company leaders (Duthel, 2008). Therefore, there are several leadership traits that I would expect of the leaders of Google Inc. Firstly, I would prefer them to be democratic. A democratic leader in this regard means a leader who allows participation and consensus in decision-making. Through democratic leadership style, the company would be able to engage it employees on matters relating to the company which will certainly be beneficial in propelling the company to prosperity. The benefit of engaging employees in matters relating to the company is because employees of Google are certainly the ones who deal directly with the company’s customers and as such understands their needs and where they want improvements effected. Democratic leaders will, therefore, benefit from the consensus building as far as running of the organization is concerned (Adeniyi, 2007). Secondly, the leader needs to be one with a vision. In this regard, the leaders of Google Inc. should be one who is confident and belief of what he or she is doing, with a clear vision of what he or she wants the company to go. This characteristic is important because such a leader would be able to inspire the employees towards the attainment of such a vision for the prosperity of the organization. Truly, a leader without a clear vision cannot inspire people to follow his or her commands (Adeniyi, 2007). The leader should also be one who inspires his followers rather than command. Research

Tuesday, August 27, 2019

Performance Standards and Appraisals Term Paper Example | Topics and Well Written Essays - 500 words

Performance Standards and Appraisals - Term Paper Example In my workplace, performance appraisal is an ongoing process whereby employees are evaluated in a constant basis. The role of performance appraisal in my workplace falls solely on the nurse managers. It is done in the form of an interview whereby both the employee being evaluated and the nurse manager fills a performance appraisal form on the employees performance. Performance in all areas is evaluated and employees are gauged in a scale of one to five with one denoting poor performance and five denoting excellent performance. This, according to Laureate Education Inc (2006) is important as managers may have divergent views in regard to the performance of an employee. This also fosters dialogue between the manager and the employee aimed at ensuring the employee understands all the aspects of the evaluation (Laureate Education Inc, 2006). Areas of weakness are identified and strategies are implemented to help improve employees performance for instance through training. All through the process, the manager conducting the appraisal documents the process through taking notes which are then co-signed by the employee being evaluated. Performance standards in my workplace are created in collaboration with employees. This is important as engaging employees in designing performance standards fosters a better understanding of the standards and guidelines and hence they are more likely to exceed expectations in their performance (Laureate Education Inc, 2006). The manager guides the employees in identifying behaviors and attitudes that are beneficial and constructive, and those that could have negative implications. These performance standards in my workplace are communicated through trainings, either on-the-job training or formal trainings. Effectively training employees enables them to understand and comprehend what they are expected to accomplish and achieve in their jobs (Laureate Education Inc, 2006). One of the strengths of this appraisal system in my workplace is

Big Data vs Semantic Web Essay Example | Topics and Well Written Essays - 2500 words

Big Data vs Semantic Web - Essay Example It should be noted that such estimation could not be achieved before the adoption of the Big Data Management. Additionally, it was also intended to increase transparency in the data being shared. In this case, any data that is not covered in the digital form will be captured in the Big Data (Heath & Bizer, 2011, p. 34). In other words, the big data management allows capturing of large amount of data in digital form. Finally, the big data management was intended to enable development of products and services of the new generation. The management and environment of the big data management surpasses the traditional data warehouse and relational databases platforms. This is because incorporates technologies that allows processing and storing data in nontransactional forms (Heath & Bizer, 2011, p. 49). The new technology of handling big data concentrates on the collection and analysis of big data that combines the use of the traditional data warehouse with logical data warehousing architectural systems. It is worth noting that the big data management must decide on what data to process. This determination is arrived at following a compliance reasons that determines what data to be stored and what data to be destroyed. Therefore, the technology requires a careful data classification that enables quicker and productive analysis of small data sets. A/B testing, integration, data fusion, machine learning, crowdsourcing, signal processing, natural language, simulation, genetic algorithm, visualization, and time series analysis are the incorporated technologies that are used in the management of the bid data. These technologies are considered exceptional in processing large data quantities efficiently and within tolerable period. These technologies have led to an increased demand of big data information management especially with organizations that generate enormous data on a daily basis (Heath & Bizer, 2011, p.162). For instance,

Monday, August 26, 2019

Books about the Phonograph Role in the World Essay

Books about the Phonograph Role in the World - Essay Example This essay presents the list of books regarding the role of the phonograph in the world such as "A Spiral Way: How the Phonograph Changed Ethnography" by Erika Brady, "Edison, the Man Who Made the Future" by Ronald Clark and "The Fantastic Phonograph" by Theresa Collins. The book, A Spiral Way: How the Phonograph Changed Ethnography is an informative book on the topic of the phonograph and gives detailed historical data on the development of phonograph as an ethnographic tool. The source explores the allocation of phonograph as a cultural product that has evolved over time. The book, Edison, the Man Who Made the Future, is advantageous for the students and people who want to gain awareness about Edison as a person who struggled towards making a product that is productive for the future generations. The book not only gives a description about phonograph but Edison and his struggle also. The chapter, â€Å"The Fantastic Phonograph† in the book, â€Å"Thomas Edison and Modern America: A Brief History with Documents† is really beneficial for the topic of my research. This source contains information and reviews given by academic and informative resources of the time when phonograph was invented. The uses of the phonograph along with various purposes of the machine are given in the resource. Allen Koenigsberg’s book contains descriptive information with proper historical accounts of the phonograph’s evolution from 1877 to 1912 and gives an explanation of Edison’s struggle in making phonograph.

Sunday, August 25, 2019

Assignment Essay Example | Topics and Well Written Essays - 250 words

Assignment - Essay Example Through the trial and error of experience society has a system of allowing us to find which system works for us. For example going to college right after high school or getting a job both systems yields results. We decide which is best for us as individuals. 2. Guided by the discipline’s three major theoretical approaches come up with sociological questions about (a) television, (b) war, and (c) colleges and universities. How has television changed in the approach to children’s programs? Well children’s programming is becoming more and more adult in nature. Sexual implications are now acceptable content for children’s animations and cartoons even some language has become acceptable. Children should not be exposed to such things. Children copy what they see. A child should behave as a child not an adult. How has war (unable to resolve conflicts) affected our society? Well war to me is any unresolved conflict whether or not it’s a battle in the field or in the office the results during and after war are pieces trying to come together. The situation in Libya is an unresolved conflict over government regime. That unresolved conflict has resulted in the rising of gas prices.

Saturday, August 24, 2019

Free Speech vs. Security Essay Example | Topics and Well Written Essays - 500 words

Free Speech vs. Security - Essay Example It allows for the debate and resolution of these problems by the mutual consent of the people. However from the homeland security perspective, a society incorporating free speech may appear as a threat to political stability. The best example here is of Egypt where normal citizens planned a historic protest on a social networking website. Also in a society where people from different racial and religious background live, freedom of speech may provoke a particular community. In such a case, spread of violence and hatred may occur. The use of internet has allowed everyone to speak freely without any fear. The amount of information available on the internet is formidable and the people have easy access to it (Sunstein, 1995). Homeland security considers this availability of extensive amount of information as a security threat as it may be used for negative purposes and this is the reason why recently a bill has been passed which gives government the right to bar internet access if it de ems it appropriate. Everyone should know that accompanying the right of free speech are the responsibilities associated with it. The responsibility of people increases multifold during wartime.

Friday, August 23, 2019

European Business and Policy Environment Essay Example | Topics and Well Written Essays - 2250 words

European Business and Policy Environment - Essay Example Bitter lessons learnt from two world wars have forged strong bonds between nations like England, France, Spain, Portugal, Germany and Italy who not very long while ago had dangerous political, military and economic rivalries. Total dependence on technological features at the cost of well established traditional practices have however proved to be the bane of modern Europe. Excessive freedom and individual rights have eroded familial and social values, and their effects are felt in increasing number of disharmony and relationship breakdowns in marriages and personal lives. Europe's commitment to environmental issues, however, is laudable and her persistent efforts to address this issue not only in continental forums but also at international levels are bound to have salutary effects not only environmentally but also on world economy. Improved environment will also positively contribute to health issues and productivity. (EU sees green future for business) Environment issues and pollution are intrinsically linked to efficiency in the power sector, natural resources and waste management. These necessitate regulatory and monitoring bodies with wide ranging powers to coordinate, check, frame and update policies, provide guidelines, maintain tight leash to curb deviations, and penalize non-compliance. (EU Business) Europe's dependence on fossil fuel also figures on environmen... (EU Business) Europe's dependence on fossil fuel also figures on environmental problems making it very important to change over to alternative eco-friendly biomass fuel for environmental and economic reasons. (Georges Markatatos, 8/6/2006) The Impact of Sud Chemie on alternative sources of energy Headquartered in Munich, Germany, Sud Chemie Group is operational globally and its sound, in-depth acquaintance, knowledge and expertise in the field of conventional and non-conventional energy resources makes it critically important for the company to pioneer efforts on switching over to eco-friendly renewable energy resources. Sud Chemie's philosophy of sparing use of conventional energy and water give its products advantageous position on reduction of emission levels and thus bring down pollution levels through lower energy consumption and higher efficiency. (Sud Chemie) Currently, the high demand for fossil fuel and its cost of production and distribution is outweighing its adverse impact on environment and the abilities of the governments to introduce legislative reforms in the power and energy sectors. This factor is also dwarfing attempts by concerned lobbies to push for viable alternatives in the form of renewable energy sources. Eco-friendly renewable energy resources industry Currently, the cost of renewable energy consumption in Europe and elsewhere is very high as compared to fossil fuels. Therefore, the momentum for switching over to renewable sources such as biomass energy does not look encouraging for the moment and the foreseeable future. Research for development purposes of the renewable energies is disintegrated due to diversities in the availability and form of

Thursday, August 22, 2019

American lifestyle Essay Example for Free

American lifestyle Essay In your opinion what are the two most significant characteristics of modernist literature? Use any TWO texts from the course to substantiate and illustrate your argument. In my opinion, the two most significant characteristics of modernist literature are the pessimistic view of modern society or modern doubt, expressed through alienation and fragmentation, and the technique of stream of consciousness. In this essay I will discuss these characteristics and several important texts to illustrate my argument. Gertrude Steins work is a perfect example of fragmentation, or rather in her case, literary cubism. In art, cubism means showing multiple perspectives, taking a form and breaking it down to rebuild it on canvas (analytical cubism) or taking materials to create a sort of collage (synthetic cubism). In modernist literature the same process occurs: people, feelings, locations are fragmented, only bits and pieces are described instead of the whole picture. As Picasso said: I paint objects as I think them, not as I see them. Stein was inspired by modernist artists such as Picasso, and wrote a series of literary portraits, including one on Picasso. She defended the representational nature of Cubism and believed that through the distortion, repetition and altering of a subject one could get a resemblance of human perception. The love song of J. Alfred Prufrock is a good example of both alienation and fragmentation. Both Prufrock and his world are fragmented. He cannot really connect with the women he sees, the conversations he hears, the city he walks through, or the mermaids he hears. The descriptions of the women he meets are not realistic, but fragmented, the poem never visualizes the woman with whom Prufrock imagines an encounter except in fragments: Arms that are braceleted and white and bare Arms that lie along a table, or wrap about a shawl. But not only the women and his environment are described in fragments, Prufrock himself is growing old, fading in a fragmented way: I shall wear the bottoms of my trousers rolled. / Shall I part my hair behind? Do I dare to eat a peach? Even his voice is a fragmentation of voices past and present ( Dante, Shakespeare) that somehow harmonize. The fragmentation in the poem the worries, the interruptions, the repetitions all sum up his relation to the world. The images are used to convey meaning, coherence can be established from the ruins of fragments. Prufrocks thoughts may perhaps move from one to another, but they do so in a way that mimics our thought process. He moves from one doubt to another, and his seemingly random observations are rooted in his past and his insecurities, just like ours are. This poems fragmentation to some extent serves to display Prufrocks indecisive, second-guessing, and pessimistic nature, but it more importantly reflects the fears and uncertainties we all posses. Moreover, Prufrocks question Do I dare//Disturb the universe? mirrors his insecurity and anxiety about his social standing. From the fragmented images provided by Eliot we come away with a coherent analysis of Prufrocks character. He is the typical modern man, and his fragmented and often unsure voice is proof of it. The other issue raised by this poem is the modernist feeling of alienation. Prufrock alienates his emotions from those around him. He is scared to show the real him for fear of being rejected or alone. He cannot connect with people on an emotional level. There will be time, there will be time to prepare a face to meet the faces that you meet. In this particular quote Prufrock tells us how he is not himself, but someone people want him to be. Prufrock experiences feelings of exclusion and alienation from the modern world and industrialised society, which becomes clear in his low self-esteem and his inability to form relationships, and makes him worry about what people think of him. He even claims he should have been a pair of ragged claws Scuttling across the floors of silent seas and feels pinned and wriggling on the wall when people scrutinise him. With the lack of self-confidence, his alienation grows stronger. The quote: Do I dare? is repeated often throughout the poem. He asks himself time after time whether he should be himself or the person other expect him to be. Because of his alienation Prufrock feels unable to act on his desires, since he feels that people will automatically reject him. This can be seen as a reflection of the fast-paced modern American lifestyle, with people feeling trapped and unable to connect with other people and to society. Another example of the alienation evident in modernist literature is Heart of Darkness. Modernist writers often present the world as desolate, and Conrads Heart of Darkness is no exception. As Marlow describes: My isolation amongst all these men with whom I had no point of contact, the oily and languid sea, the uniform sombreness of the coast, seemed to keep me away from the truth of things, within the toil of a mournful and senseless delusion (p.30)

Wednesday, August 21, 2019

Classes, control and saving Essay Example for Free

Classes, control and saving Essay This section is a grouping of elements influencing various forms of power control. The specification highlights three device power classes possible for Bluetooth radios that are related to the power range of the transmitter: †¢ Class 1 is 100mW and up to about 100m range †¢ Class 2 is 2. 5mW and up to about 20m range †¢ Class 3 is 1mW and up to about 10m range Radios are subject to environmental influences and the Class 3 range of up to 10 meters is more likely to be 5 meters when furniture or people are in proximity of the radio. This form of power control is provided to cut down on interference with other devices in the ISM band and obviously help prolong battery life (see â€Å"Bluetooth: Goodbye Infrared†). The second form of power control is on the receiver side of a Bluetooth device. To enable all classes to communicate in a Piconet without damage to the RF front ends of the lower power classes, a method for controlling Class 1 device transmitter power is required. Transmit power control is mandatory above 4 dBm, below this level i. e. all Class 2 and 3 modules it is optional. To implement a power control link the remote device must implement a Receive Signal Strength Indicator (RSSI). For a transceiver wishing to take part in a power controlled link it must be able to measure its own receiver signal strength and determine if the transmitter on the other side of the link should increase or decrease its output power level. The RSSI makes this possible. Power control is specified is as a golden receive power, defined as a range with a low limit and a high limit. The RSSI must have a minimum dynamic range equal to this range. The RSSI must have an absolute accuracy of  ±4dB or better when the receiver signal power is –60 dBm. In addition, a minimum range of 20. 6 dB must be covered, starting from –60 dB and up. The instructions to alter the transmitter power are carried in the Link Manager Protocol (LMP) link (see â€Å"Bluetooth: Goodbye Infrared†). The last form of power control relates to the power consumption. The Hold, Sniff and Park modes are power saving modes set out in the specification aiming to preserve battery consumption. The Hold mode is typically used when a master is establishing a link with a new device and requires the other slaves to temporarily halt their transmissions. The Sniff mode puts slaves into a low duty cycle mode of operation but is still an active member of the Piconet and the master can only transmit after a ‘sniff’ interval. In Park mode slaves enters a low duty cycle mode of operation and are no longer active members of the Piconet (see â€Å"Bluetooth: Goodbye Infrared†). B. Applications and Profiles. Undeniably the ideal candidate for the first wave of applications will inevitably be based on mobile cellular technology, but what other applications can be realised using Bluetooth technology? The specifications outline a wireless technology that is as cost effective as the cable it replaces and aim to balance reliability, resilience, convenience and low power. The short-range connections of data and voice could mean the emergence of applications suitable for: ? Access points allowing mobile devices connection to services e.g. telephone network (PSTN) or LAN services. ? Mobile phone link to Laptop PCs ? Mobile phone connections to wireless headsets ? PDA, palmtop and desktop PC inter accessibility for file and data synchronisation. The Bluetooth core specification describes the protocol, but the Profiles document enhances this by setting out a number of profiles for applications and defining the way a number of services operate e. g. a file transfer profile defines how devices exchange data files. The profile document aids applications development, describing implementation schemes and highlights parts of the core Bluetooth protocol supporting the profile. Profiles supported are outlined in Figure 6; they are depicted grouped together. Each profile is built upon the one underneath, attaining their features from the lower profiles. The result of this approach gives the profiles a similar look and feel for user recognition. Plus developers can recycle modules for speeding up development time and reducing costs (see â€Å"Bluetooth Technology: What are the Applications? †). A wireless headset for a mobile phone is an application example using the profiles. It uses the Headset profile as its core specification. In Figure 6 the Headset profile is built from the Serial Port Profile (SPP) and the Generic Access Profile (GAP). The GAP being the base of all profiles, it defines the generic procedures related to device discovery and link management (see â€Å"Bluetooth Technology: What are the Applications? †). Figure 6: Bluetooth Profiles.

Tuesday, August 20, 2019

Difference Between Cost Control and Cost Reduction

Difference Between Cost Control and Cost Reduction Introduction A cost reduction program is a type of method which is to improve profitability of the organization or by expected to get a good result that flow to the bottom line of the financial statement and exempted from any serious damage to the organization itself. As this program is much more about reducing cost or reducing expenses of the organization, so a good cost reduction program is all about how to control the damage of an organization. Furthermore, a cost reduction program is said can be improved the profitability of an organization because by reducing expenses, profits are increased without making others changes. On the other hand, if the cost reduction program can matched with a sales improvement program and perhaps, finally it will get the double profit. A cost reduction program must be a complete plan that is results-oriented. A structured cost reduction program will put the company on track to achieve maximum profitability and achieve the highest performance. Moreover, this program also implies a series of program that retain all of the essential characteristics and quality of the product and thus it must be confined to permanent and genuine savings in the costs of manufacture, administration, distribution and selling, brought about by elimination of wasteful and inessential elements form the design of the product and from the techniques and practices carried out in connection therewith. What is the different between cost control and cost reduction? In fact, cost control also known as cost management or cost containment; it controls the costs of the organization at the given level. Besides, cost control emphasis on ensuring that the cost does not exceed the standard budget of the organization. Businesses use cost control methods to monitor, evaluate, and ultimately enhance the efficiency of specific areas, such as departments, divisions, or product lines, within their operations. However, cost reduction is a power exercise or is an exercise which will out all of the effort to saving cost from whatever level they are. Cost reduction does not have any standard, or anything is accepted as ideal. Every element of cost is scrutinized, every operation is screened and every procedure is analyzed to identify the ways and means of reducing costs. Cost reduction can result in saving the product cost, manufacturing cost s, and life cycle cost. There are two different concepts between cost control and cost reduction. Cost control is achieving the cost target as its objective while cost reduction is directed to explore the possibilities of improving the targets or company profitability. Therefore, cost control will end the exercise when achieved the organization target or objective. While cost reduction is a continuous process and it has no visible end. Furthermore, cost control try to attain the lowest possible cost under existing conditions whereas cost reduction does not recognize any condition as permanent since a change will result in lowering the cost. If the cost control emphasis is on past and present, while the cost reduction emphasis is on the present and future. Besides, cost control is a preventive function whereas cost reduction is a correlative function. It run even when an efficient cost control system exists. The difference between both of it can be summarized as cost control ensuring the costs is in accordance with established standards whereas cost reduction is concerned with try to improve the cost by continuous and without accordance with any of the standard. The main benefits of cost reduction programs are it can enhance profitability and enhance cash flow of the organization. It presents the key elements and factors to consider in program design and implementation. Cost reduction program is also can ensure the results will match with the goals or objective and the values of the organization. It is a widely-acknowledged fact that cost reduction program is one of the most challenging responsibilities or tasks that a company needs to undertake, especially when there are so many ways open to cost-conscious managers. Finally, an integrated tax reduction program can reduce the onerous financial burdens that can stable a companys development and can free up precious capital that can be result to the firms long-term benefit. Literature Reviews/Case Study/Research Findings There are five cases and cost reduction methods in these literature reviews. The methods including Target Costing (TC), Activity-Based Costing (ABC), Just in Time (JIT), Enterprise Resource Planning (ERP), and Value Engineering (VE). Case study 1 (Target Costing) Definition: Target costing also called product costing method in which an attempt at the planning and development phase of a product life cycle to attain a specified cost that is decided by management. This approach is to seek the lower costs by designing a quality product that reduces costs in the production phase. It can be described as a systematic process of cost management and profit planning. Case study: In 1993, Toyota uses target costing approach to generally reduce costs at the design stage. By using this approach, Toyota sets goals for cost reduction and then tries to achieve these new targets through design changes that will accomplish the cost reduction goal. Toyota was comparing the costs of the new design with the old design in order to guarantee a cost reduction after implementation of the new technique. This is the main idea that Toyota uses to achieve their companywide goals. There are several steps in the sequence of price, production, and cost decisions. First, Toyota decides what the new retail price of the automobile by taking the old price and adding the value of any new functions. The sales division comes up with the suggestion for the production volume by taking past numbers and indexing them to market trends and the state of competitors. Second, Toyota is focus on cost planning. This cost planning is based on the product plan and targets for retail price and also production volume. The purpose of using cost planning by Toyota is for determine the amount by which costs can be reduced through better design of the new model. Toyota establishes a profit target that is subtracted to determine their target cost. These cost planning decisions are made for three years before they release the model. Toyota estimates the approximate costs of a new model by sums of the cost variations of the new model and the old model. This technique is very beneficial to Toyota, because it tends to be less work and provides more accurate results. In addition, it also helps the specific divisions understand the cost fluctuations. Besides that, Toyota removes variable costs both models incur such as wages and indirect costs by using this approach. Meanwhile, they use their decisions on costs that change between the two models in design and production volume. The main point in this case study is to show how cost planning at Toyota is focused on the design phase. Toyota does this by setting goals for cost reductions through design changes. Toyota takes these goals and then assesses them to different divisions to make the necessary changes. Toyota believes that by changing product design to produce lower price to achieve a higher level of profitability. Case Study 2 (Activity-based Costing) Definition: Activity-Based Costing is a costing model that identifies the cost pools, or activity centers, in an organization and assigns costs to products and services (cost drivers) based on the number of events or transactions involved in the process of providing a product or service. The concept of Activity-Based Costing has been considered a sophisticated method of cost calculation since the early 1980s. In addition, Activity-Based Costing (ABC) assigns manufacturing overhead costs to products in a more logical manner than the traditional approach of simply allocating costs on the basis of machine hours. Activity-Based Costing first assigns costs to the activities that are the real cause of the overhead. It then assigns the cost of those activities only to the products that are actually demanding the activities. Case study: Boeing Commercial Airplane Group (BCAG) is the worlds largest manufacturer of commercial airplanes. It comprises approximately 60% of Boeings total revenues. BCAG Wichita is a cost center manufacturing plant producing fuselages, noses, struts, nacelles, and thrust reversers for 737, 747, 757, 767, and 777 airplane models. In May 1999, the plant employed approximately 16,835 employees directly, and was responsible for indirect employment of 53,100 workers within the state of Kansas. As part of its overall drive to gain and retain world-class aerospace manufacturing status, BCAG Wichita is focused on developing a lean, efficient design and production system supported by an effective cost management strategy. The cost management strategy supports initiatives designed to link the manufacturing process and support activities so as to simplify the whole production process, while maximizing benefits from the use of lean business practices. Cost management strategy initiatives include simplifying production, shortening flow and cycle times, increasing quality and inventory turnover, identifying core products and processes, and linking the design and manufacturing process to decrease product time-to-market. Activity-Based Costing links and supports the manufacturing process. It provides information to tailor business streams and material management, costs of activity and processes, value added versus non-value added analysis and profitability analysis used to improve the make versus buy decision-making process. ABC also provides analysis of set-up and run costs, costs of scheduled and unscheduled maintenance, costs of asset failure, and costs of manufacturing capacity, thereby allowing manufact uring managers to manage the assets under their control more effectively. Finally, ABC provides analysis on the costs of design changes in configuration as impacted on the manufacturing floor, costs of incorporating complexity into a configuration design, and the costs of quality. The highest hurdle in achieving this type of cost management architecture lies in moving the corporate financial department from its classic accounting role as scorekeeper or policeman to the role of business partner. In a business partner role, the corporate financial department can support strategic decisions relevant to the companys continued competitive advantage by providing financial data that highlights the impact of these decisions. BCAG Wichita views a successful implementation of ABC as one that fulfills three major roles: Addresses the size, complexity, and diversity of the manufacturing process, Facilitates the integration of financial decision makers into a more supportive business partnership role, and Implements effective cost management strategy initiatives. Case Study 3 (Just in Time) Definition: Just-in-time (JIT) production also known as lean production, it is a pull system of production, means the actual orders provide a signal for when a product should be manufactured. When there is Demand-pull, it enables a company to produce only what is required, with the correct quantity and correct time. These features of Just-in-time production system accomplish close organization among work- stations. Therefore, its objective can be defined as producing the right part in the right place at the right time (in other words, just in time). Case study: From July 1990, top managers of Daioku have begun completing the Kanban production system-moving from the traditional push-type production management to pull-type production management. This type of system produces only quantities necessary to fulfill the demands of the next operation. The quantity is pulled when it is needed, where it is needed, and in the exact quantity which is needed. For instead, since beginning the implementation of Just-In-Time, many difficulties have occurred. The difficulties include: Combining the data and material flows instead of classifying them. Post the products, its store and manufacturing process instead of a flow without any post. Changing from L-shape assembly line into V-shape assembly line. This requires a set of new equipments and techniques. Problems exist between Daioku and supplier (subcontractors), for instance, traditional ways of shipping material based on the pre-determined plan is now being eliminated and every supplier are now required to collect the Kanban back from the order-post and ship their material based on the information in the Kanban. Everyone in the firm required to participate in Just-In-Time. They need to determine how to make the shop floor operations become easier and efficient. Daioku carried out discussions and meetings to find solutions to the problems in the year of 1992. Therefore, Daioku sent their experts to help suppliers to solve their problems gradually. In Daioku, The inventory part was reduced the dramatically in this year. By using Just-In-Time method, the stock levels of raw materials, work in progress, components and finished goods can keep in a minimum. However, this requires a carefully planned scheduling and flow of resources through the production process. Just-in-time method promotes continuous enhances on the products. At the same time, this method can eliminate waste. Waste results from any activity that adds cost without adding value. For example, the unnecessary moving of materials, the accumulation of excess inventory, or the use of faulty production methods that create products requiring subsequent rework. Just-In-Time should enhance the profits and return on investment by reducing inventory levels (rising the inventory turnover rate), reducing variability, improving product quality, reducing production and delivery lead times, and reducing other costs (like those associated with machine setup and equipment breakdown). In conclusion, Just-In-Time production system aims to (1) meet customer demand in a timely manner (2) at the lowest possible total cost and (3) with high-quality products. Case Study 4 (Enterprise Resource Planning) Definition: Enterprise Resource Planning (ERP) is a computerized inventory control and production system that was born from Material Requirements Planning systems (MRP). It is a system that organizes functions of an institution. It assists in account, finance, human resources and e-commerce applications through creation of databases and graphical user interfaces. It unifies the tasks of institutions like corporations, government agencies, non-profit organizations, powerful institutions and industries and businesses establishments. There are some businesses start to compete on a global scale, it is critical to streamline operations and processes in business to reach a higher level of productivity and efficiency in information exchange and supports e-commerce applications, for example supply chain management (SCM) and customer relationship management (CRM). On the other hand, software that comes up with functionality to various systems that will coincide with one another as a whole is required to combine all of the information or operations of a company into a single unit. Central database is one of the most outstanding parts of the ERP system. Case Study: By October 1997, a group of 50 top business executives and 10 senior IT professionals had been congregated to device the SAP project to come up with a set of best practices that would become common work procedures for every Nestlà © division which are manufacturing, purchasing, accounting and sales by adopted new pan-Nestle way. Firstly, in order to implement the technical side, a common structure across the company, the vanilla would be code 1234 in every division. The SAP system customize around the uniform affair procedure. The group decided that they are not to use SAP in supply chain because the ERP supply chain module adopted was brand-new and therefore risky. Furthermore, Manugistics supply chain module followed all the SAP standards and could easily be integrated. Nestlà © implement five SAP modules which are purchasing, financials, sales and distribution, accounts payable and accounts receivable and the Manugistics supply chain module which deployed across every Nestlà © division, by March 1998. Besides that, the purchasing company for confections pursues the identical best practices and information as the purchasing company for beverages. To beat the Y2K deadline, the best project group had overlooked the integration points between the modules. All purchasing departments now used general names and systems, and followed a general process, but their system was not integrated with the financial, planning or sales groups. A salesperson may have given a valuable customer a discount rate and entered it into the new system, however the accounts receivable department wouldnt know about it. Hence, it would appear to the accounts receivable operative as though the invoice were only partially paid as customer paid the discounted rate. The project team had essentially replaced divisional silos with process silos to unify the companys separate brands. The time constraints necessitated by Y2K had put too much pressure on the people in charge of executing the changes. The project team had lost the big picture of how the various components would work together. Hence, the existing modules had to be integrated and the team still needed to roll out another two more SAP modules which are sales and distribution on the domestic side, and accounts receivable as well as a new module for the supply chain. Since Dunn had rejected the SAP supply chain module two years before, therefore, it leads to decision to replace all but a couple of parts of the Manugistics system with APO. The last state of design was completed on April 2001 and giving the project teams a highly detailed road map to follow. One month later, Tom James came on board as director of process change for the Best project with the responsibility as a connection between the divisions and the project team. He was so surprised by the poor relationship between divisions and project team. They conducted surveys that were involved of how the workers affected by the new systems were dealing with the changes and the feedback was the users were not prepared to make process alter. ERP projects are famous and need a long period and a lot of money to done it. Dunn maintains the slow and steady wins the race. Nestlà © United State accomplishes the significant ROI with the greatest bulk of savings from better demand forecasting. The old process included a sales man giving a number to the those men and demand planner do not know what the hell they are talking about then the factory changes the number again. With SAP in place, general databases and business processes lead to more trustworthy demand forecasts for the various Nestlà © products. Furthermore, because all of Nestlà © United State also using the same data then Nestlà © can forecast down to the distribution center level to diminish the inventory and the redistribution expenses that occur when too much of a product is sent to one place and not enough to another. The supply chain improvements accounted for a major chunk of the $325 million has saved from SAP. Case 5 Value Engineering (VE) Definition: Value engineering (VE) is a systematic method to improve the value of goods or products and services by using an examination of function. Value, as defined, is the ratio of function to cost. Value can therefore be increased by either improving the function or reducing the cost. It is a primary tenet of value engineering that basic functions be preserved and not be reduced as a consequence of pursuing value improvements. [1] Value engineering is sometimes taught within the project management or industrial engineering body of knowledge as a technique in which the value of a systems outputs is optimized by crafting a mix of performance (function) and costs. In most cases this practice identifies and removes unnecessary expenditures, thereby increasing the value for the manufacturer and/or their customers. Case Study: This project was for an underground car park beneath a new shopping centre in Three Waters, Madrid. A fully ducted ventilation system was the approved design contained with the Spanish Building Regulations. However, this would be costly to install and would impact on the development programmed. Therefore, the purpose of the simulation was to demonstrate that a non-ducted, mechanical system would also meet the Spanish Building Regulations. The planning requirements often mean extensive car parks to proposed offices, residential and retail developments. The ventilation of these car parks can present a significant cost to the developer in terms of capital expenditure for plant, energy consumption and maintenance, as well as the implications for the programmed if extensive ductwork and plant has to be installed. The use of Computational Fluid Dynamics (CFD) is most effectively used at early design stage, also can be used as a tool for solving existing problems. The specific objectives of a project can vary considerably. The key objectives of the simulations are normally to ensure that the distribution and concentration of carbon monoxide (CO), is in accordance with Building Regulations. The Building Regulations comprise a number of Approved Documents. These Approved Documents contain design options which if adopted, the scheme is deemed to comply. Applying Value Engineering can identify potential savings in capital, maintenance and energy costs without any adverse effect on performance. Computer simulation is therefore, becoming an essential value engineering design tool. For example, a designer may question why 6 air changes per hour (ACH) should be provided when 4 ACH will accomplish the desired result. The benefits of simulation are that the proposed designs can be tested against the acceptance criteria contained within the Building Regulations before any financial commitment is made. In conclusion, Three Waters using  [i]  of Computational Fluid Dynamics (CFD) as a tool for value engineering can significantly benefit new and existing developments by avoiding unnecessary capital expenditure, reducing construction time, and providing reductions in energy consumption, CO2 emissions and maintenance. Analyses/Discussion Cost reduction programs have classified in many types and each type of the program will provides different benefits to the companies. In this part, we are going to give the analysis of the advantages and benefits the types of cost reduction methods which shown below. Finally, analysis of cost reduction will show in the end of this part. Total Quality Management (TQM) TQM is the one of the famous method that uses the focus of quality of management process. This will increase the productivity and efficiency in the business and in the manufacturing process. If the process is used from the beginning during the manufacturing process, there is less likely of chance for incorrectly producing products or devices. Therefore, it would bring the correct product in the end of process in creating less waste in raw materials and less lost hours due to repeating of the process. TQM method is not only will increase the productivity, but it also increases the level of pride in the employees. This is because each employee becomes responsible for a higher level of quality in his or her work. Kaizen Costing (KC) Kaizen costing is the maintenance of present levels for products currently being manufactured via systematic efforts to achieve the desired cost level. In general, it is the process of cost reduction during the manufacturing phase of a product. The word KAI is means modify and change and ZEN means think, make good, and make better. So, in overall, kaizen costing is focuses on continuous and gradual by small betterment activities rather than large or radical improvement made through innovation or large investments in technology. Basically, kaizen costing imply four effects, there are paying attention to the quality and productivity, acquiring little by little kaizen and problem-solving ability, perceiving the work place as their own, and understanding the meaning of kaizen. Kaizen costing meets the goal with the continual and relentless reduction of non-value-added activities and costs, the elimination of waste, and improvements in manufacturing cycle time all contribute to the effort. In additional, kaizen costing has brings the benefit of reduction in production time, reduction in rejection, energy saving, and improved quality. Value Engineering (VE)/Value Analysis(VA) Value engineering (VE) or value analysis (VA) is a process of systematic review that is applied to existing product designs in order to compare the function of the product required by a customer to meet their requirements at the lowest cost consistent with the specified performance and reliability needed. The key focus of the value engineering is the management of functionality to yield value to the customer. For instance, not that long ago, consumers of electric kettles were offered a variety different types of metal-based boiling device. The value of a kettle is derived through heating water and therefore its functionality can be determined as temperature, capacity, reliability, safety, and else. With the same functionality of the boiling water, designers would probably look towards a kettle which made of plastic. Plastic has the same functionality as metal in terms of containing and boiling water. However the switch from metal to plastic does not impair this value and functionality with the customers. This is because the customers just want to boil water, but it gives result in a cost saving for the manufacturing company. The benefits of effective VE process can be summed up including speed of getting an effective design into the market without problems and through error-free manufacturing and assembly processes, reliability and durability of the product in the market which enhances the reputation of the product and the company, low overall cost which enhances product margin and also releases finances within the business as well as allowing the ability to engage in price competition, enhanced quality and compliance with minimal costs of warranty that allows a company to differentiate its products based this perceived quality of use and esteem, and finally the value engineering process satisfies the primary goal of any business which is to make a profit and survive. Activity Based Costing (ABC) Activity-Based Costing method is a tool which could bring about significant improvement in the quality of overhead cost allocation. The ABC process is able to incorporate both physical measures and causal principles in the costing system. The basic idea of ABC is to allocate costs to operations through the various activities in place that can be measured by cost drivers. In other words, cost units are assigned to individual activities, such as planning, packing, and quality control using a resource cost driver at an initial stage with the costs of these activities being allocated to specific products or cost objects in a second phase of allocation via an activity cost driver. The advantages are providing insight into the fastest- growing and least visible element of cost-overhead, improving profitability by monitoring total life-cycle cost and performance. It also improves the effectiveness of budgeting by identifying the cost or performance relationship of difference service level. It encourages continuous improvement and total quality control because planning and control are directed at process level. At last, is facilitating elimination of waste by providing visibility of non-value added activities and improving make or buy, estimating, and pricing decisions that are based on product cost that mirrors the manufacturing process. As a result, ABC can support managers to see how to maximize shareholder value and improve corporate performance. Enterprise Resource Planning ERP can be describes to integrate all departments and functions across a company onto a single computer system that can serve all those different departments particular needs. Hence, it is extremely important to know how to use effectively Enterprise Resource Planning for a success implementation. In order for Enterprise Resource Planning system to succeed, it must be capable of successfully integrating manufacturing with the other processes of a company. Besides that, Enterprise Resource Planning is not the cure to all the problems a business will face. A number of advantages and disadvantages exists to this technology, and those who know this will be the most likely to succeed. By the implementation of Enterprise Resource Planning, it comes up with a number of advantages that helps to solve a number of problems that have plagued large organizations in the past and used to integrate the many processes of a company or organization. Scalability is also an advantage, like Enterprise Resource Planning also helps to improve the production levels and to control costs more efficiently, and this enabled us to control the whole enterprise more efficiently. As a result, Enterprise Resource Planning is no longer just a competitive advantage in this globalized world. It is very important requirement for every enterprise. To truly be effective, it may be necessary to combine the benefits of Enterprise Resource Planning with those of Customer Relationship Management (CRM). Just in Time (JIT) Just in Time is a set of techniques to improve the return of investment of a business by reducing in-process inventory and its associated costs. In addition, the process is driven by a series of signals, or Kanban that tell production processes to make the next part. Just In time causes dramatic improvements in a manufacturing organization`s return on investment, quality, and efficiency. For an example, Toyota Motor Thailand had implement Just In time methods during the crisis on July 1, 1997. Toyota Motor showed a strong commitment to uniting with whole workforce as well as suppliers and dealers to ride out the crisis. This commitment was shared with the labor union, and the entire company together with the Toyota Group implemented through measures to make operations more leaner, utilizing the resulting excess labor to implement improvement initiatives as well as additional education of employees and suppliers. Based on the concept of just in time, energy was supplied to each process when it was needed and in just the right amount; personal wastebaskets were reduced to one quarter of their original size to encourage less paper usage; and localization was promoted by expanding local procurement to Tier 2 and Tier suppliers. Meanwhile, Toyota Motor Thailand also directed energy into the education and training employees. As a result of these efforts, without having dis missed a single full-time employee, inventories were cleared in January 1998 and production began to rise again. In 2004, Toyota Motor Thailand produced 273980 vehicles. Toyota Motor Thailand paved the way for the strides forward it is making today. There are several examples of advantages of JIT. Both inventory and the cost of holding it go down as the inventory-reorder quantity and the maximum inventory level drop. However, because inventory requires incurring an ordering or setup orders that mu

The History of the Dog :: essays research papers

the dog has been around for many years they are careing loving animals but they also have a darkside. Dogs have been considered mans best friend for many many years; but do they really fit in the category as mans friend. DOgs have been known to turn on there owners and cause chaos throughout homes even neighborhoods. should they really be let in our homes and if so haow close can we really get to the vicious creatures? Domestic Dog, mammal generally considered to be the first domesticated animal. This trusted work partner and beloved pet learned to live with humans more than 14,000 years ago. A direct descendant of the wolves that once roamed Europe, Asia, and North America, the domestic dog belongs to the dog family, which includes wolves, coyotes, foxes, and jackals. Dog ancestry has been traced to small, civet-like mammals, called miacis, which had short legs and a long body and lived approximately 40 million years ago. The evolving relationship between the domestic dog and humans has been documented in fossil evidence, artifacts, and records left by earlier civilizations. Prehistoric dog skeletal remains, excavated from sites in Denmark, England, Germany, Japan, and China, indicate the early coexistence of dogs with people. An ancient Persian cemetery, dating to the 5th century BC, contained thousands of dog skeletons. Their formal burial and the positioning of the dog remains reveal the esteem in which the ancient Persians held their dogs. The relationship shared by dogs and humans also is evident in cave drawings, early pottery, and Asian ivory carvings that depict dogs. A statue of Anubis, the half dog, half jackal Egyptian god, was discovered inside King Tutankhamen's tomb, constructed in about 1400 BC. Literary references to the dog include those found in the Bible and in the Greek classic the Odyssey by Homer. In 1576 an English physician and dog fancier, John Caius, wrote a detailed text on dog breeds, Of English Dogges. Dogs are featured in tapestries that were created in the Middle Ages (5th century to 15th century), and in the work of many artists, including 17th- and 18th-century European painters Peter Paul Rubens and Thomas Gainsborough. Although it is not known how humans and dogs first learned to coexist, people soon discovered the many ways dogs could enrich their lives. Dogs have been used to hunt for food, herd animals, guard livestock and property, destroy rats and other vermin, pull carts and sleds, perform rescues, and apprehend lawbreakers.

Monday, August 19, 2019

The Character of Falstaff in Henry IV :: Henry IV Henry V Essays

The Character of Falstaff in Henry IV      Ã‚  Ã‚  Ã‚   The character Sir John Falstaff played a crucial part in Shakespeare's Henry IV, Part 1.   Falstaff portrayed a side of life that was both brutal and harsh.   This was important because ,as Falstaff was, all the other main characters in the play were Nobles.   Unlike Falstaff, the other nobles in the play acted as nobles.   Falstaff, on the other hand acted more like the lower class people.   In doing this he portrayed the thoughts and feelings of the lower class people.   As he portrayed the lower class people, Falstaff brought the reader to think.   This was because Falstaff contrasted well with the nobles and brought out new aspects of the themes.   Some of these views brought out be Falstaff were quite harsh, in comparison to the accepted views of the time.   To help balance the harshness of his views, Falstaff was very good natured and invoked laughter in the reader.      Ã‚  Ã‚  Ã‚   Falstaff lived a harsh life and the severity of his life contributed to his views and ideas.   Although he was a noble, his views reflected those of the lower class people. Falstaff did not hold the same view of honor as any of the other main characters in the novel.   To Falstaff, honor was just a word and nothing worth dying over.   Some characters in the novel sought honor through battle.   Falstaff, on the plus side, felt that war was just a place where people had fun.   He showed this when he allowed himself to be paid off by the upperclassmen and took the prisoners and thieves to be killed in battle.   Falstaff knew that they would just be killed and that it was not worth it to have men with a future be killed.   He, rather, led the men with no life into battle, to be killed.   Falstaff also had a different view of loyalty than any of the other nobles.   The nobles felt that one should be loyal to all.   Falstaff felt that one should be loyal only to other thieves.      Ã‚  Ã‚   Falstaff was an excellent talker and also well versed.

Sunday, August 18, 2019

The Awakening Essay -- essays research papers

The Awakening is a novel about the growth of a woman into her own person, in spite of the mold society has formed for her. The book follows Edna Pontellier through about a year of her life. During this time we see her struggle to find who she really is, because she knows she cannot be happy filling the role of the mother-woman that society has created for her. She did not believe that she could break from this pattern because of the pressures of society, and ends up taking her own life. Should readers sympathize with her death? The answer is no.   Ã‚  Ã‚  Ã‚  Ã‚  Edna Pontellier was on her way to an awakening. She realized during the book that she was not happy with her position in life. It is apparent that she had never really been fully unaware however, because her own summary of this was some sort of blissful ignorance. Especially in the years of life readers are told about before her newly appearing independence, we see that she has never been fully content with the way her life had turned out. For example she admits she married Mr. Pontellier out of convenience rather than love. She knew he loved her but she did not love him. It was not even the case that she did not know what love was, for she had had infatuations that at the time (being so young) she believed was love. She consciously chose to marry Mr. Pontellier even though she did not love him. When she falls in love with Robert she regrets her decision of marrying Mr. Pontellier. Readers should not sy...

Saturday, August 17, 2019

Bio Sketch Eminem

Phase 5 Individual Final Project Case Study of Marshall Bruce Mathers III (aka Eminem) Colorado Technical University Online Abstract Marshall Bruce Mathers III also known as Enimem is not only a rapper, record producer, actor, and Grammy award winner but also one of the most controversial and bestselling artists of the 21st century. (Eminem 2012) In this paper I have included a bio-sketch of his life from birth to his current day success. I have also provided a psychological explanation, in my opinion, of his behaviors using the behaviorist perspective as well as a comparison of those behaviors utilizing the humanistic theory.Additionally I have included a detailed outlook on Eminem’s upbringing using Erik Erikson’s human development theory, Lawrence Kohlberg’s foundational theory, Abraham Maslow’s theory of motivation-hierarchy of needs, and David McClelland’s three needs theory. To conclude this paper I will discuss how understanding human behavio r through the use of psychological behaviors is very useful. Biosketch of Marshall Mathers â€Å"Eminem† Marshall Bruce Mathers III later known as Eminem was born October 17, 1972 in St. Joseph Missouri. His mother, Deborah Mathers was only 15 at the time he was born.Deborah raised Marshall alone due to his father Marshal Mathers Jr. abandoning the family when Eminem was eighteen months old. (Eminem) Deborah rarely maintained employment for longer than a few months at a time. Deborah’s lack of stable employment caused the family to move multiple times between Missouri and Michigan. Due to the constant relocation and instability in his life Marshall spent much of his childhood living in subsidized housing projects In his biography Marshal states â€Å"I would change schools two or three times a year.That was probably the roughest part of it all,† (Eminem) The lifestyle he was forced to live left him feeling like an outcast, having no friends, keeping to himself, and constantly being beaten up at school. The abuse by his school mates along with his own mother abusing him left a large negative impact on his life. At age seventeen Eminem attended Lincoln High School in Warren Michigan. (Eminem) Even with his wide vocabulary range and habit of reading the dictionary for fun he struggled with the educational atmosphere and dropped out of school.Eminem stated, â€Å"I don’t feel that I am stupid but school just wasn’t for me. † ( Reece2012) His passion for rap started at the young age of four, beginning with rhyming words and battling his schoolmates in the lunch room. However he did not become serious about rapping until he was fourteen and later when making a name for him-self at the age of seventeen. (Reece 2012)Eminem explains that his biggest challenge was the constant rejection from the other rappers because of the color of his skin. This rejection caused even more anger to build up and eventually flow through his music later on in his career.Despite his reoccurring failure at rap battles and poor radio show appearances Eminem released his first album titled Infinite in 1999. (Reece 2012) The album sold less than 1,000 copies and did not make a profit. However, this was still the first hugely important step needed for the millions of dollars he would make during his career. After selling his first record the next life changing event occurred. On December 25, 1995 Eminem and his longtime girlfriend Kim Scott welcomed their daughter into the world naming her Hailey Jade Scott. Reece 2012) Despite Eminem’s new daughter being born he kept pushing his rapping career. During this time in his life he made many attempts to make a name for himself, but he continuously failed and eventually had nothing. The trials and tribulations he went through revealed themselves t loudly in the form of outrage during a rap battle in 1997. Eminem lasted an hour in this battle, throwing down every race card he was given earning him second place losing only because of one minor slip up.Furious at the feeling of failure once again he failed to notice that in the audience there were producers from Interscope Records. Producer Dr. Dre from Intersope eventually caught up with Eminem and signed him on the spot. (Eminem) In 1999 Eminem released The Slim Shady LP album making him an instant success and selling over three million copies. His music was comprised of childish humor, energy, profanity, and violence. Eminem’s lyrics often referenced his personal views on life and his with other people including his mother and wife Kim Mathers, which he later divorced.Even though many people view his music as profane, violent, drug promoting, and homophobic Eminem went on to release his next album titled The Mashall Mather’s LP released May 2000. This album went on to sale over 19 million copies and earned him a Grammy Award for Best Rap Album in 2001. Along with a Grammy this album is conside red to be among the greatest rap albums of all time. (Eminem) In 2007 after years of success Eminem nearly died from a drug overdose. Family problems, drugs, alcohol, and the loss of his daughter in a custody battle kept him from recording music until 2009.In late 2009 he announced that he had gone to rehab and produced the album Relapse. In 2010 Eminem released an album called Recovery. Both of these albums were auto-biographical albums relating to his addiction experiences bringing him back to mainstream rap. (Eminem) Eminem recently stated, â€Å"I started learning how to not be angry about things, learning to count my fucking blessings instead. By doing that, I’ve become a happier person. † (Eminem) I have chosen to focus on and investigate why Eminem focused on negative concepts throughout his music career.I think that he is an excellent example to why behavioristic perspective makes since. As I mentioned in the biographic sketch Eminem was constantly bounced arou nd, never having stability because he was raised by an abusive mother. He was placed into many situations where he was beaten, cussed at, and ridiculed for reasons beyond his control. Eminem was also forced to grow up in mostly poverty ridden housing projects that ran rampant with drugs, guns, and violence. I believe that because he grew up pretty much with the previously mentioned issues the behavior and norm for him was learned and often times came through in his music.In a lot of his songs he discusses that he is angry with his mother often times referring to her in a vulgar manner. In his song Puke he refers to his ex-wife and not wanting to be around her because she is disgusting and ridicules her. In the song I’m Sorry Mama he references to his childhood and being a failure and later talks as though he is happy his mother is dead. The second behavior I feel is learned is his addiction problem. Through song lyrics Eminem accuses his mother of being addicted to prescripti on drugs.He was raised in poverty ridden areas where drugs were very prevalent. He grew up seeing drugs as a way to cope and deal with life, and this environment made a lasting impression on him. In 2006 his career tapered down and he went through a divorce. At this point he reverted back to the behavior that he learned growing up; using drugs and alcohol are acceptable ways to cope. His music after his overdose reflects his new learned behavior and ideas from rehab. The next part of my case study focuses on Eminem’s motivations and development throughout his life.This is analyzed using Erik Erikson’s human development theory, Lawrence Kohlberg’s foundational theory, Abraham Maslow’s theory of motivation-hierarchy of needs, and David McClelland’s three needs theory. According to Erik Erikson’s psychosocial stages of development stage one is: Trust Versus Mistrust. This stage lasts from birth until eighteen months of age and is the crucial ti me frame that a child develops an attachment to a caregiver. (Editorial 95-97)I believe that Eminem did not have his needs met in this stage. His father was in and out of his life for most of this time period.Because of his absence Eminem did not develop a connection or attachment with his father. Although Eminem was living with and being raised by his mother there was a lack of trust/ attachment with her as well. At the time of Eminem’s birth Deborah was fifteen years old and using drugs. (Eminem) I believe that Deborah was stuck in Erikson’s fifth stage which is Identity versus Role Confusion. Being stuck in this stage made it difficult for her to give Eminem the tools necessary to have trust and an attachment to her. As Eminem got a little older he fell into Erikson’s third stage of Initiative versus which is Guilt.During this stage children begin to develop mental and physical activities that develop self-confidence. (Editorial 95-97) Eminem struggled with t his stage. He moved from school to school and he was picked on and abused. At this time he was also living in an abusive home. The abuse from school and home injured Eminem’s confidence and often made him feel alone and like an outcast. (Eminem) According to Eminem the only way he had of showing he had some confidence was by challenging rap battles starting at the age of four in the lunch room at school. Reece 2012) Although the battles in the lunch room may not have been the most appropriate way to obtain confidence it was how Eminem managed to make his way through this stage. Stage four is Competence versus Inferiority, also known as Industry versus Inferiority. This stage is when children develop social and intellectual skills, and become confident in their talents and competencies. (Editorial 95-97) Eminem excelled in this stage. It was during this stage that Eminem failed out of school and began focusing on his rapping career. Eminem endured the feeling of excessive fail ure and was often criticized for being white.His relationship with his mother during this stage was poor because of her constant ridicule of him for dropping out of school and pursuing a career in rap music. (Reece 2012) Even with the lack of support he pushed through and eventually he was recognized in 1977 by producer Dr. Dre. This recognition was a large part of why Eminem was able to complete this stage. Eminem had finally made a name for him-self and began to recognize and embrace who he actually was. This occurred in stage five of Erikson’s theory which is Identity versus Role Confusion.Eminem utilized this time to recognize what he had gone through in his life growing up. During this stage he raps about his life in many of his songs and is able to understand and explain why he is the way he is. It was also during this time that the role in life he played as â€Å"Marshall Mathers† was now non-existent. Eminem was now identified as a leading musician; and he was comfortable with this life and persona he had created for himself. According to Lawrence Kohlberg his theory of Moral development can be broken down into three levels and seven stages.Kohlberg believed that people functioning at lower levels of his theory are motivated by self-interest. (Editorial100-101) While Eminem is a smart individual the behaviors that he displayed for much of his life would have placed him in the first level of Kohlberg’s theory. Kohlberg believes that level one stage one is that children base decisions on seeking pleasure and avoiding pain or getting caught. Stage two is the cost benefit stage in which one acts out morally to get an award. (Editorial 100-101) Eminem is known as one of the most controversial artists in the 21st century.He seeks out pleasures by pushing limits in his songs that are against most people’s moral beliefs. He often acts in a manner that may not be acceptable, but often times got him rewarded. Eminem does not meet the criteria for level two or three of Kohlberg’s theory. Eminem doesn’t behave morally. He embraces and works off criticism rather than trying to avoid it. Eminem is far from meeting the stage three requirements of Kohlberg’s theory. He is still promoting violence, drugs, and alcohol; and his morals are not even close to what modern day society accepts as appropriate.Finishing up with Eminem’s adulthood it is best described by Erikson’s sixth stage which is Intimacy versus Isolation. By age thirty-five Eminem had been married and divorced twice to the same woman. Eminem lives the typical party life of sex with multiple women, drugs, alcohol, and, not much concern for other individuals or relationships. Even though Eminem has not led the perfect life he has remained proud of his daughter and career. Eminem was still releasing music as recent as 2010 and currently working in studios for a new album that he will be releasing later at no specific date.He continues to be just as widely known by today’s youth as he was when he originally debuted. Eminem clearly had some type of motivation which leads me to Abraham Maslow’s theory of motivation. I believe that Eminem strived to reach the Esteem Needs of Maslow’s pyramid. The Esteem Needs level he is in causes him to feel that he belongs and has a degree of importance. Recognition, attention, social status, and accomplishment are all motivators to reach this point. (Maslow) Eminem lacked a lot of these characteristics as a child and now he has fame from billions of fans.He is recognized by all races as being a brilliant rap artist and has accomplished his dream of being a musician. I believe that he made gaining recognition and fame so important that he skipped the safety needs stage. He used what little money he had on recording songs and going to rap battles instead of using it on food and a safe place to live. According to David McCelland’s theory of three needs Eminem’s motivations become clearer. Eminem had a huge need and want to succeed in rapping. Rapping was something he wanted bad enough that he pushed through a lot of hardships to obtain.The second part of McClelland’s theory is affiliation. Affiliation according to McCelland is the need for human interaction and positive relationships with others. (Editorial 184) This was not a motivation for Eminem; Eminem’s relationships were damaged as his career grew. For example, putting his mom’s past behaviors out for the public to hear or talking poorly about his daughter’s mom in the lyrics he raps. The third motivation which was power was definitely one of Eminem’s biggest motivations. Eminem uses his music to impact others with his bizarre lyrics and tales of a terrible life.He also had established the power to make people understand that just because he was white he still lived in poverty and became a rap star, and most importantly he got his life story told. Reflecting back on the behavioristic perspective I still find it to be true that most of his behaviors were learned. Eminem’s mother was undereducated and addicted to drugs. Because she was undereducated she like Eminem did not progress through the important stages of Erikson’s theory. How can it be expected for Eminem to go through all the stages when he was raised in a fashion of where the proper guidance was non-existent?Secondly in Maslow’s theory of Hierarchy needs a person should have their physiological needs met first, then safety, and then social needs. (Maslow) Eminem’s mother fell short in this area as well. Her concern to keep him safe and have a since of security were less than her need to socialize and be accepted by others. This seems to be the path that Eminem followed her example with. In phase one I focused on the behavioral perspective and analyzed Eminem’s need to have negative concepts throughout his music , and his addiction to drugs and alcohol.In this section of my case study I will analyze these same two behaviors. However in this section of my paper I will be using the humanistic theory. The humanistic theory explains the human behavior as based on the basic goodness of the person, rather than more biologically or socially mechanistic models. The humanistic theory explains that behaviors are a combination of here and now responsibility, worth and self-improvement. (Editorial 202) First I want to address Eminem’s constant use of negative lyrics that often refer to his past.As part of the humanistic approach Abraham Maslow created the hierarchy of needs theory. Maslow explains that the lowest level of needs is the physiological needs category. Eminem struggled with having his basic needs met as a child mainly because of the poor living conditions and because his mother did not provide for him. Eminem struggled with the next two levels of Maslow’s hierarchy safety need s and sense of belonging as well because the lack of safety and protection and sense of being loved during his childhood. Eminem managed to make it through his life and eventually made it to the fourth level of needs.The fourth level is his self-esteem; although he was now famous his self-esteem was is still pretty low. He valued the need to have self-worth and often got self-worth by building himself up and by using other’s flaws such as his mother’s to make himself look and feel better. He also did this to make it more obvious to others that he was forced to overcome obstacles in his life. This theory when applied to Eminem’s life is much different than the behavioristic theory outcome which showed his behaviors were learned from being in the environment he was raised in.However, the humanistic approach shows that he chose these behaviors because of the events that occurred in his life. His anger was not learned but was an outcome of the things he has gone thr ough throughout his life. The second behavior to look at is his drug and alcohol addiction. The humanistic theory explains the drug and alcohol addiction as a way for Eminem to increase his self-esteem. He could have also used his addictions to replace the lack of love and sense of belonging he felt throughout his life. He essentially used his addiction as a way to cope with the basic essential needs that were never met in his life.The humanistic approach explains his addiction as a filler in the needs hierarchy, something to give him what he lacks. He didn’t have love or the feeling of being needed; the alcohol took away that feeling and replaced it with another happy or high feeling. This is also very different from the behavioral aspect that showed he gained this behavior from learning it from is mom and or environment he grew up in. Either way you look at it from the behavioral approach or the humanistic approach you will get the same result. Eminem’s behaviors occ ur directly from events in his past.This is very helpful when explaining why he is the way he is, because it gives concrete reasons and not excuses for his behaviors. Psychological theories don’t leave much room for assumption which cuts out misunderstandings. Without the theories one may simply think that Eminem is controversial for the simple sake of wanting attention. I have learned a lot by breaking down Eminems’s life story and analyzing it. I learned that some of the behaviors we learn as children are instilled in us whether we realize it or not. I used to think that the saying,† It’s all I know† was an excuse.Looking further into the behaviors and matching them with different stages of Eminem’s life has given me a better understanding. This is definitely something that I can use while working with troubled youth at my current job. I also have learned that even if your life doesn’t follow the correct stages or theories motivations can make the world of difference. Eminem did not live the perfect life and did a lot of things out of order but he was motivated enough to succeed in what he wanted. All the theories are very helpful but still leave room for alterations.I guess it is life’s learning manual as best as you can get Now to reflect back on all of Eminem’s behaviors and the different theories I have used to break down his life and personality I will discuss whether his behaviors are normal or abnormal. Normal behaviors are defined as the behaviors, attitudes, and approaches to life expected for a given society. Abnormal behaviors are defined as the thoughts and behaviors that stand outside of what is expected for a given society. (Editorial 2011) Eminem clearly displays abnormal behaviors. Eminem shows behaviors that we as an American society tend to frown upon.He is very vulgar and publicly projects his thoughts of encouraging violence and alcohol through the use of his music. Eminem also tends to represent the â€Å"thug life† mentality dancing around sagging his pants, swearing, and promoting the use of drugs and violence during his concerts. Proper normal American behavior is very much against how Eminem behaves. Normal behaviors for American culture are hardworking, respectful, polite, and dignified conversation. Society often associates behaviors like Eminem’s as a representation of an under educated criminal.I believe that Eminem’s behaviors can be attributed to his past. According to the Psychoanalytic Perspective a person’s psychological disorders stem from unresolved childhood issues pertaining to sex drive and aggression; deals with subconscious impulses and influences on conscious thought and behavior. (Editoral 2011) Eminem has multiple childhood issues that deal with aggression, his impulses, influences and sex drive. He was abused and built the aggression towards others. He was very impulsive which I feel he learned from his mother constantly moving them around at the spur of the moment.He also growing up had a huge lack of love from his mother and very little female attention which can contribute to his need for affection as an adult creating a very unhealthy sex drive. My feelings on the use of case studies are still split. One of the big advantages of case studies is that you can determine a person’s personality, behaviors and social acceptance based off of theories that have already been made all you have to do is analyze and place them where you see fit. A disadvantage of the case study method would be that it is based off of one’s own thoughts and perspective hich leaves a lot of room questions and speculation. As I have been working week to week and reviewing the different theories I have learned a lot. I learned that that has been an influence from somewhere whether it be from a person’s environment or by simply having being born to a particular family (genetics) that a pers on’s behaviors can usually be directly linked. I have truly learned that the best way to understand someone is to put your-self into their shoes. Look at where they were brought up, family characteristics and traits they inherited. Psychology plays a massive part especially in my workplace.I work in an environment that is meant to help troubled youth become productive members of society. We focus on helping them obtain normal behaviors to make it in society. Now that I have a better understanding of why these youth make the choices that they do I have the necessary tools to help them in a more direct manner instead of guessing. For example, if I know that a kid has been moved from foster home to foster home because their mother or father was on drugs I can place them into one of the theories such as Maslow’s hierarchy and break down the behaviors and life events that they need to work through.I have also learned that there is probably a reason for the kids to act out s imply out of the thrill of being bad. I will continue to study psychology so that I may further my career with a better understanding. I also just simply find it to be very interesting to understand how a person’s brain works and affects their everyday life. Also by studying psychology I have a better understanding of myself. I see what my personality profile is and am more aware of how other people may perceive me.It also has opened my mind to be able to understand others in a more efficient way. I will apply the knowledge I have learned in this course and have already begun to do so in my career. I have a better understanding of the clientele I work with and will continue to expand on what I have learned. The final part of my paper focuses on the statement â€Å"You can’t understand others unless you understand yourself. † I still struggle with completely understanding myself and why I may or may not be the way I am. Although I an place myself into different t heories and it makes since there are still some open questions I have. I used the MBTI test and it made it a little clearer as to why I tend to gravitate to some other personality types. Since I know why I get along better with some people it also opened my eyes to understand why others may get along with each other for example bully kids and scape goat kids tend to stick to others that are like them. I see it in my particular workplace that quite often as a team builder amongst staff where we are required to learn each other’s personality.As adults in a working environment it helps us focus on learning each other better and lowers the amount of personal issues that we as a company have. I also feel that understanding other’s behaviors and personalities is helpful because you better understand who may be more suitable for a particular duty that needs done. I think that this course would be a valuable learning tool to everyone that works in the environment I work in. As a life skills trainer to troubled youth we are supposed to help them understand why they do what they do.How are we supposed to really be able to completely and fully help them if we can’t clearly explain it to them or ourselves why the behaviors they have are fixable or why they have them in the first place. As an addition to what training responsibilities I already have with staff at work I will be implementing that they learn some of these theories we explored. I also have already begun to use the personality type test to bring staff together as a starting learning experience for them to understand who they work with and the benefits of utilizing each other’s strong personality attributes.References Eminem. (2012) Biography. com. Retrieved 03:12, August 23, 2012 from http://www. biography. com/people/eminem-9542093 Eminem. Reece, Rod. (2012) Retrieved 03:25, August 23, 2012 from http://www. imdb. com/name/nm0004896/bio Editorial Board(2011) Introduction to Psycholo gy, Electronic Version. Pgs 95-97,100-101,184. Words of Wisdom LLC. Retrieved from course smart solutions database. Maslow’s Theory of Motivation(2012) Retrieved 01:51, August 30,2012. From http:www. envisionsoftware. com/articles/Masolw_Needs_Hierarchy